NEW Flexible LED Strips

Great way to light up your motorcycle!

Flexible LED Strips are available in 5 colors: blue, green, red, white, yellow.

They run off of 12 volt but can handle up to 15 volts - current draw is 100mA/ft.

Sold by the foot but available in up to 3' lengths.  The strip can be cut every 3 LEDs to provide the versatility you need.  The strips are 5/16" wide and are adhesive backed.  LEDs are spaced 18 to a foot so the effect is of a continuous light rather than a "spot" effect.

Our Waterproof LED Strips measure approx 7/16" wide and 3/16" thick.  They are available in red, blue, green, yellow and white and can be submerged up to 10'.

Our RGB Waterproof LED Strips measure 1/2" wide and 3/16" thick and have 9 LEDs per foot.  Very impressive when used with the RGB controller.

NEW for Motorcycles - Lazer LEDs!

We now have a Plug & Play Lazer LED system-
no soldering! 


Whether you have a Goldwing or a Harley, LEDs can create beautiful effects for your bike.  The reflection off of chrome is fantastic!

 


Light up the night by adding GLOWIRE to your bike!

Increase visibility and safety!

Create awesome effects!

Wrap GLOWIRE around your luggage rack or antenna for a 
spectacular look.

-I installed the Front Fender Kit with yellow GLOWIRE.  It really adds to the looks and visibility of the bike at night and I like the extremely low current draw.-
                M. L. Parrish, GWRRA #50951 

(Click on picture to enlarge)

asantenna.jpg (11781 bytes)asback.jpg (21759 bytes)asdarkprofile.jpg (17494 bytes)asrear.jpg (16126 bytes)fender.jpg (5650 bytes)

frontpagecycle.jpg (11437 bytes)goodprofile.jpg (16168 bytes)mervfront.jpg (27307 bytes)trailer.jpg (33827 bytes)

 

Light up a baseball cap! Improve your safety at night by adding GLOWIRE to your jacket LEDs reflecting off of chrome on a Harley Davidson

We have several different light kits available.  All sections of GLOWIRE have hook up wire attached for easy installation.  You just need to connect the driver to the battery, mount your GLOWIRE and you're set to go!

No need for extra batteries to run GLOWIRE.  A 30 foot section at 2000hz and 12.6 volts draws only 180 mA!

-I installed GLOWIRE on my Goldwing radio antenna and had immediate response on the first evening ride.  It actually stopped traffic as people stared and asked me about it.  It has withstood the elements and keeps on glowing.  Great product.-
Joe Closson, GWRRA #141597